Knafs Lander 2 Review: Would I Retire My Old Pocketknife for This?

I’ve carried the same pocketknife for several years. Nothing dramatic happened to it. I just wanted to try something new, and Knafs is based in Clearfield, about six hours from me here in Monument Valley. By Utah standards, that practically makes us neighbors. So I checked out the Lander 2 in Moondust Micarta. The olive handle is what I’d have picked off a shelf. The fact that I can replace it with a trout or a cat in a spacesuit requires a little explanation. Clutch Lock

Watch my Knafs Lander 2 video review on YouTube.

The part that would earn a spot in my pocket

For a knife that spends most of its day folded up, the two numbers I care about are 4.25 inches and 2.75 ounces. That’s the closed length and weight of the Moondust version. Open it and you get a 3.25-inch S35VN stainless steel blade with a curved cutting edge. The olive canvas Micarta has a visible weave, and the gray stonewashed blade looks right alongside it. Of the three looks in this review, this is the one I’d want to live with for years. Clutch Lock

Two details matter more to me than the finish. The Clutch Lock works from either side, and the pocket clip can move to the other side too. Nick LeFort spent a month carrying the G10 version for GearJunkie. He could get all four fingers around the handle and found the action particularly smooth, although he thought people with smaller hands might find it a little large. That’s a useful distinction: a knife can be light in your pocket and still feel substantial in your hand. Clutch Lock

Lore Lab’s review put a finer point on the blade shape. Their reviewer used a G10 Lander 2 for cardboard and camp cooking. The curve toward the tip gave them plenty of edge for slicing on a board, but they had to raise the handle farther to get the tip down to the surface. I’d take that trade for a knife that might open a shipping box one day and slice an apple the next. LORE LAB

Brook Trout or Kitty Cosmo Crew?

“Scales” are the two panels on the outside of the handle. Knafs’ Fast Swap system lets you change them without taking the whole knife apart. As someone who keeps a pocketknife for years, I like that for a fairly boring reason: if I wear out a handle or get tired of looking at it, I can keep the blade and lock I already know. knafs.com

The Brook Trout G10 scales are the cleverer design. There’s no picture of a fish posed on the side. The whole handle takes on the markings of its flank: an olive back, pale spots and a wash of orange along the bottom. It would look right at home in a tackle box. Out here in the desert, it may also be my best shot at coming home with a trout.

The Kitty Cosmo Crew scales take the opposite approach. There’s a cat named Sfank floating through space after a pocketknife just beyond his reach. I appreciate that somebody at Knafs had to approve both that artwork and the name “Sfank.” These are the ones I’d put on first. Kitty Cosmo Crew G10

Both sets are $19.99, and both designs are UV printed on G10. Knafs says the artwork can chip with normal use. If wear on the illustration would bother you, I’d stick with the Micarta. It already looks good, and it comes with the knife. Brook Trout G10

Would I switch?

At $144.99 for the Moondust model, I’d buy the Lander 2 on the strength of the stock knife. If all you need is something to open the mail, I’d keep what you have. What makes this one worth considering is that Knafs sells replacement hardware, right down to the screws, springs and pocket clip. For someone shopping for the next knife to carry for several years, knowing a lost screw doesn’t mean starting over is worth more than an extra set of scales. Clutch Lock

So yes, I’d give the Lander 2 my pocket for a while. My old knife has earned a spot in the drawer. And if it ever comes back into rotation, it’ll be because I missed it. It’s going to have a hard time competing on space cats.